SAE J1939, J1708, J1587 ECU Prototyping And Development System With IoT Capabilities
The board as shown in the image is the result of a customer project where we replaced a discontinued electronic…
Hardware
SAE J1939 Prototyping Hardware
Raspberry Pi 3 + PiCAN2 – Embedded Linux System For CAN Bus Application Development
The Raspberry Pi 3 is part of a series of credit-card-sized single-board-computers (SBC) developed in the United Kingdom by the…
Dual CAN Bus Board for Arduino Due Supports Extended Power Input Range 7 VDC to 32 VDC
The jCOM.CAN.DUE-X is a dual CAN bus interface for the Arduino Due, but it is not an Arduino shield in…
Arduino Due – CAN Bus Gateway Prototyping With ARM Cortex-M3
The Arduino Due is the first Arduino board based on a 32-bit ARM core microcontroller. With 54 digital input/output pins,…
BeagleBone Serial Cape Supports CAN Bus (Controller Area Network) and RS485
The BeagleBoard is a low-power open-source hardware single-board computer (i.e. embedded system) produced by Texas Instruments in association with Digi-Key…
Arduino Due: ARM Cortex-M3 Prototyping Board With CAN Bus, RS232, RS485/422, Ethernet, WiFi, Bluetooth
According to the official Arduino website at arduino.cc, the Arduino Due is “currently retired.” This is one of those cases…
PiCAN2 DUO CAN-Board for Raspberry Pi With Extended Power Supply Range
This PiCAN2 DUO board provides two independent CAN-Bus interfaces for the Raspberry Pi 2/3. The board utilizes the Microchip MCP2515 CAN…
SAE J1939 ECU Simulator Board With USB Port
The jCOM.J1939.USB gateway board is a high-performance, low-latency vehicle network adapter for SAE J1939 applications. It allows any host device…
PiCAN2 – CAN Bus Hardware Interface for the Raspberry Pi
The PiCAN2, a CAN (Controller Area Network) Bus Interface for the Raspberry Pi 2 and 3, is the most successful product…